What is a UART display?
Author:
A UART display module is a display unit that exchanges data with another device (such as a microcontroller or microprocessor) using the UART (Universal Asynchronous Receiver-Transmitter) serial communication protocol.
The host device controls the display using simple commands, while the display module's built-in processor handles more complex tasks, such as drawing graphics and rendering the interface.
Key Advantages
Simple development and quick to learn: This is the primary advantage of UART displays. Because complex display logic is encapsulated within the screen itself, developers do not need to manage low-level pixel operations or timing control; they simply send commands via the serial port. When used with manufacturer-provided PC design software (such as DGUS or UI Editor), developers can create graphical interfaces using a "What You See Is What You Get" (WYSIWYG) approach—allowing even those with no programming knowledge to easily create the human-machine interfaces they desire.
Saves host resources: Display control and graphics rendering are performed by the screen's own processor (often based on an 8051 core). The host MCU just sends commands and receives data (like touch feedback) via UART, which makes its workload much lighter.
It's simple to connect and can be used in many ways: UART is a basic communication protocol supported by most microcontrollers. Hardware connections are simple, usually needing only four wires: TX (Transmit), RX (Receive), VCC (Power), and GND (Ground). Some models also support industrial bus standards like RS232 and RS485.
It has lots of useful features and is fully integrated. Many UART display modules have lots of features. These include touchscreens, memory for storing images, fonts and other data, and ways to update the system. Some modules can even connect to the internet wirelessly using Wi-Fi or Bluetooth.
Analysis of Working Principles
Here's how we'll talk to each other: UART is a type of communication where data is sent without needing a clock signal to keep things in order. It makes sure that the sender and receiver understand each other by adding start and stop bits to data packets. For communication to work, both parties must agree on the same baud rate (e.g. the common 115200 bps).
Workflow:
Interface Design: Developers use software provided by the manufacturer on a PC to design the user interface. They do this through methods such as drag-and-drop operations and importing images. Resource Download: The display uses flash memory to store the interface assets and configuration files, which are downloaded there via SD card, UART or USB.
Runtime Communication: The host MCU sends short instructions (e.g., "switch to screen #3," "set text to 'Hello,'" or "display a thermometer") via the UART interface. The display's built-in processor understands these instructions, finds the right images from flash memory, and uses the LCD panel to show the content.
Common Types
UART displays encompass various technologies to suit different requirements:
TFT Color Serial Displays: This is the most common type. It can show rich graphics and text, which makes it ideal for applications that need a high-quality human-machine interface (HMI).
Character/Graphic LCD Modules: More traditional display types—such as the common 1602 character display—though some models also support UART interfaces.
LED Dot-Matrix Displays: Some LED displays can be controlled by a computer using a UART connection. This is useful for showing simple text or graphical information.
Typical Application Scenarios
Due to their ease of use and powerful capabilities, UART displays are widely used in:
Industrial Automation: Interfaces between humans and machines (HMIs), control panels for equipment, and sensor data readouts.
Smart Home & IoT: Smart appliance control panels and environmental monitoring station displays.
Medical Equipment: Patient monitors and portable diagnostic devices.
Automotive Electronics: In-vehicle infotainment systems, dashboards, and diagnostic tools.
Comparison with Other Display Interfaces
Interface Type | Key Features | Typical Applications |
UART | Requires few connections, simple to develop, saves host controller resources; relatively slow speed (speed depends on baud rate) | Small-to-medium screens (typically under 3.5 inches), HMI interfaces |
SPI / I2C | Also low-speed serial interfaces requiring few connections; typically requires the host controller to directly control pixels, making development more complex | Small LCD/OLED screens, sensors, etc. |
RGB / LVDS / MIPI | High-speed interfaces for transmitting large amounts of image data; supports high refresh rates; requires the host controller to have a corresponding controller; complex development | Large, high-resolution screens (e.g., smartphones, tablets, large automotive displays) |
Overall, a UART display is a "smart" display terminal that integrates a controller and a graphics library; by simplifying communication and development workflows, it makes adding visually appealing, sophisticated graphical interfaces to embedded devices highly efficient.
Latest News
Nov 20,2026
How to Choose an LVDS Display: A 5-Step Guide
LVDS displays offer stable, cost-effective solutions for industrial equipment, with flexible customization and long-term supply support.
Nov 18,2026
Shenzhen Connects with the World: SONYTEK Embraces the Spirit of APEC 2026
As Shenzhen hosts APEC 2026, SONYTEK celebrates the city's innovation and global connectivity while delivering customized display solutions worldwide.
Oct 30,2026
Backlight LCD Display Selection Guide: How to Choose a Backlight for Industrial Equipment
This guide explains how to select the right LCD backlight technology, brightness, lifespan, and heat management based on industrial equipment requirements to ensure reliable display performance and long-term operation.
Oct 21,2026
What Is an Optical Bonding Display? A Selection Guide
Optical bonding improves display readability, durability, and sunlight visibility by eliminating the air gap, with OCA and OCR offering different solutions for industrial applications.
Oct 14,2026
IoT LCD Display Selection Guide for Equipment Makers
Choose the right IoT LCD display by matching COG, COB, or TFT technology to your device’s display needs, operating environment, power consumption, and long-term production requirements.
Sep 28,2026
How to Choose a China TFT Display: An Industrial Buyer's Guide
Choosing a China TFT display is not just about price—it’s about matching the right specifications, durability, customization, quality control, and long-term supply to your industrial application.
Tel:
Phone/WhatsApp:
Email: