How to Choose an LVDS Display: A 5-Step Guide
Author:
LVDS Display: A TFT LCD module that receives image data through LVDS (Low-Voltage Differential Signaling).
LVDS is not an outdated interface. For industrial equipment at 1080p or below that needs stability and a long service life, LVDS is still a cost-effective choice.
This article is for hardware engineers and buyers at equipment manufacturers. After reading it, you will know how to read LVDS specs, how LVDS compares with other interfaces, and what order to follow when selecting a display.
What Is an LVDS Display? Why Industrial Equipment Still Uses It
An LVDS display is a TFT display module. The main board sends pixel data to the LCD panel using low-voltage differential signals.
How LVDS Transmits Signals
LVDS sends data over paired wires. The receiver only looks at the voltage difference between the two wires.
Noise on the line affects both wires at the same time. The voltage difference stays the same, so the noise cancels out.
4 Reasons Industrial Equipment Favors LVDS
- Strong noise immunity: suits electrically noisy places such as factories and EV chargers
- Longer cables possible: works when the main board and display are mounted apart
- Mature technology: supported by mainstream industrial boards and processors
- Practical cost: for applications at 1080p or below, you don't pay for bandwidth you won't use
A note on our role: Sonytek is a display module supplier, not a complete-system manufacturer. We provide TFT Display modules for equipment manufacturers, so your product development goes more smoothly.
Understanding LVDS Specs: Channels, Bit Depth, and Data Format
When choosing an LVDS display, check three things first: channel count, bit depth, and data format. All three must match the main board, or the image will not display correctly.
Single vs. Dual Channel, 6-bit vs. 8-bit
Channel count decides how much data is sent at once. Bit depth decides how many levels each color has.
Configuration | Data pairs | Clock pairs | Total pairs | RGB bits |
Single channel, 6-bit | 3 | 1 | 4 | 18-bit |
Single channel, 8-bit | 4 | 1 | 5 | 24-bit |
Dual channel, 6-bit | 6 | 2 | 8 | 36-bit |
Dual channel, 8-bit | 8 | 2 | 10 | 48-bit |
A simple rule: more wire pairs means more data and finer color.
What Happens If the VESA or JEIDA Format Is Wrong
VESA and JEIDA are two ways of arranging the data. For 6-bit displays there is no difference. For 8-bit displays, the format matters.
With the wrong format, the screen will not go black. But colors will be off, and gradients will show banding.
When debugging, check the display datasheet first, then set the main board's output format.
Resolution and Bandwidth
Higher resolution needs a faster pixel clock. A single channel has a pixel clock limit.
Take the common i.MX6 processor as an example. Its single-channel limit is about 85 MHz, enough to drive roughly 1366×768. Higher resolutions need dual channel. The actual limit depends on the host platform, so follow the platform documentation.
LVDS, RGB, MIPI, or eDP: Which to Choose
The short answer: for equipment at 1080p or below where stability matters, choose LVDS. If you need higher resolution and fewer wires, evaluate eDP.
Interface | Bandwidth | Wiring and cable | Cost | Suitable applications |
LVDS | Medium | Few wire pairs; cable can be longer | Practical | Industrial control, EV chargers, medical equipment |
Parallel RGB | Medium | Many signal lines; complex routing | Low | Simple Linux systems, mid-range MCUs |
MIPI DSI | Medium-high | Short cable; suits compact designs | Medium | Small, low-power hand-held devices |
eDP | High | Few wires; supports high resolution | Higher | High-resolution, high-refresh-rate equipment |
When should you not choose LVDS?
- Resolution far above 1080p, which needs multiple channels and a higher-spec host controller
- Very high refresh rates are required
- The host controller no longer outputs LVDS
On the other hand, LVDS is still a good fit in these cases:
- An existing product needs continued supply
- The equipment needs a long service life
- The budget needs to stay under control
5-Step Checklist for Choosing an LVDS Display
The 5 Steps
Step 1: Confirm the host interface. Find out how many channels, how many bits, and which format the host outputs.
Step 2: Confirm the resolution. Set the resolution based on screen content, then match it to the channel count.
Step 3: Confirm brightness and temperature. For indoor equipment, enough brightness is fine. For outdoor equipment, choose high-brightness, wide-temperature specs. Common industrial displays operate from -20°C to +70°C. For outdoor and automotive use, choose a wider temperature range.
Step 4: Confirm touch and surface. If you need touch, choose capacitive and confirm the interface. If you need anti-glare, add a surface treatment. We offer integrated Touch Panel solutions.
Step 5: Confirm supply and customization. Equipment sells for years, so the display can't be discontinued suddenly. Ask about the supply period first, then discuss customization of cable, backlight, and interface.
Sonytek LVDS TFT Display Specifications
Sonytek's LVDS TFT Displays range from 5 to 32 inches. Reference brightness runs from 250 to 1,050 cd/m², and bar-type LCDs are also available. The table below lists the key parameters of the main models.
Size (in) | Sonytek model | Resolution | Interface | Reference brightness (cd/m²) | Notes |
5 | TT050188NA | 720×1280 | LVDS | 400 | — |
5.7 | TT057001NA | 640×640 | RGB / LVDS / MIPI | 350 | — |
6.86 | TT686017NG | 480×1280 | LVDS 8-bit | 600 | Bar LCD |
7 | TT070079NG | 1024×600 | LVDS 8-bit | 450 | — |
7 | TT070147NH | 1024×600 | LVDS | 1050 | — |
7 | TT070148NG | 1024×600 | LVDS | 600 | — |
8 | TT080002NA | 1024×768 | LVDS | 250 | — |
8 | TT080038NA | 1024×768 | LVDS | 300 | — |
8 | TT080035CTG | 1920×1200 | LVDS | 500 | High brightness, capacitive touch (CTP) |
8.8 | TT880008CTG | 1280×480 | LVDS 6/8-bit | 500 | Bar LCD, capacitive touch (CTP) |
9 | TT09002NG | 1024×600 | LVDS 8-bit | 450 | — |
10.1 | TT101048NH | 1280×800 | LVDS | 1000 | High brightness |
10.1 | TT101090NH | 1280×800 | LVDS | 800 | High brightness |
10.1 | TT101072NH | 1920×1200 | LVDS | 1000 | — |
10.25 | TT103002NH | 1920×480 | LVDS 8-bit | 1000 | Bar LCD |
12.1 | TT121003NH | 1280×800 | LVDS | 750 | — |
12.1 | TT121006NH | 1024×768 | LVDS | 1000 | High brightness |
12.3 | TT123002NH | 1920×720 | LVDS 8-bit | 1000 | Bar LCD |
15.6 | TT156018CTH | 1920×1080 | LVDS | 1000 | High brightness, capacitive touch (CTP) |
21.5 | TT215005NA | 1920×1080 | LVDS | 300 | — |
21.5 | TT215009NH | 1920×1080 | LVDS | 1000 | — |
23.8 | TT238002NA | 1920×1080 | LVDS | 350 | — |
23.8 | TT238008NH | 3840×2160 | LVDS | 1000 | High brightness |
32 | TT320005NH | 1920×1080 | LVDS | 1000 | High brightness |
All models use IPS displays, except TT070148NG, which uses the EWV viewing type. For outdoor equipment, start with the high-brightness models at 1000 cd/m² or above. For touch integration and full specifications, feel free to contact us.
Matching Displays to Equipment Type
Equipment | Selection focus |
Fuel dispensers and EV chargers | High brightness, wide temperature, weather-resistant design |
Medical equipment | Stable, clear display; helps meet the customer's required standards |
Industrial control | Noise immunity, durability, long service life |
Automotive equipment | Wide temperature, vibration resistance, meets automotive-grade requirements |
FAQ and Customization
Q: Will LVDS be phased out? A: Not in the short term. New high-resolution designs are moving to eDP, but equipment at 1080p or below and long-life products still use LVDS widely.
Q: How long can an LVDS cable be? A: Differential signaling resists noise, so longer cables are workable. The actual length depends on resolution and cable type, so confirm by testing.
Q: Can a 6-bit display connect to an 8-bit host? A: Yes, but set the host to 18-bit output. If you don't, the colors will be wrong.
Q: The display lights up but the colors are wrong. What should I check first? A: Check the VESA or JEIDA format first, then the 6-bit and 8-bit settings.
Need Help?
Specs don't match? Cable length doesn't fit? Sonytek can help adjust the interface, cable, and specifications for your equipment. See our Custom Solutions for details.
If you have selection questions, please contact us. Our engineering team will help evaluate.
Latest News
Nov 20,2026
How to Choose an LVDS Display: A 5-Step Guide
LVDS displays offer stable, cost-effective solutions for industrial equipment, with flexible customization and long-term supply support.
Nov 18,2026
Shenzhen Connects with the World: SONYTEK Embraces the Spirit of APEC 2026
As Shenzhen hosts APEC 2026, SONYTEK celebrates the city's innovation and global connectivity while delivering customized display solutions worldwide.
Oct 30,2026
Backlight LCD Display Selection Guide: How to Choose a Backlight for Industrial Equipment
This guide explains how to select the right LCD backlight technology, brightness, lifespan, and heat management based on industrial equipment requirements to ensure reliable display performance and long-term operation.
Oct 21,2026
What Is an Optical Bonding Display? A Selection Guide
Optical bonding improves display readability, durability, and sunlight visibility by eliminating the air gap, with OCA and OCR offering different solutions for industrial applications.
Oct 14,2026
IoT LCD Display Selection Guide for Equipment Makers
Choose the right IoT LCD display by matching COG, COB, or TFT technology to your device’s display needs, operating environment, power consumption, and long-term production requirements.
Sep 28,2026
How to Choose a China TFT Display: An Industrial Buyer's Guide
Choosing a China TFT display is not just about price—it’s about matching the right specifications, durability, customization, quality control, and long-term supply to your industrial application.
Tel:
Phone/WhatsApp:
Email: